[TTwizted]

My water heater is leaking from the hot water pipe. I looked it up online it says to tighten the fittings but it’s welded on one side. So what do I do to fix this. I will add pics to help u see what I’m talking about.

 

[Logtec]

Hire a lic’ed plumber

 

[Debo22]

Use a piece of rubber hose and a gear clamp trick

 

[OpenSights]

Flexseal or hire a licensed plumber. Whichever you trust more.

 

[chonkie]

Just put a big pipe wrench on the fitting and tighten it up. The pipe will twist with it enough to stop the leak.

 

[Logtec]

Just put a big pipe wrench on the fitting and tighten it up. The pipe will twist with it enough to stop the leak.

That’s usually what I do.

 

[Blue2]

Have you tried to turn it off and on again?

 

[hewhodigsholes]

Coat the entire top of the heater with hydraulic cement.

 

[jakewilcox]

Turn it off, jiggle the cable and turn it off again. That will fix it.

 

[dhal22]

Encapsulate the entire water heater rectally, your's of course. Grip firmly with the appropriate muscles and that should seal the leak.

 

[Lee'sPlumbing]

Have you tried to turn it off and on again?

This!!!

 

[yoyoer]

I would sacrifice this to the salvage gods and get $5

 

[Wpjheating]

in case your Water heater has been leaking then its time you look into it with Heating's professional and well trained team who resolve the issue in no time at reasonable cost

 

[ROCKSTARPLUMBER]

Nice Plug there. Do you freelance?

 

[TerryTotoSucks]

in case your Water heater has been leaking then its time you look into it with WPJ Heating's professional and well trained team who resolve the issue in no time at reasonable cost

I think my neighbor caught one of your guys smoking reefer in her attic.

Not a good look breh……

 

[ROCKSTARPLUMBER]

It was rainbow fyntenol.

 

[skoronesa]

It was rainbow fyntenol.

That's the stuff that turned the frogs gay right?

 

[TerryTotoSucks]

Hi,
Simply tighten the fitting using a large pipe wrench. It will cause the pipe to twist just enough to halt the leak.
Thanks.

That’s what I whispered in you sisters ear last night

 

[Logtec]

Hi,
Simply tighten the fitting using a large pipe wrench. It will cause the pipe to twist just enough to halt the leak.
Thanks.

Ya sure, is that what you would do?