[skoronesa]

The perfect cleanout. This made me happy.

 

[skoronesa]

Some Jackazz put the gas line right in the way of the steps so I had to lift the snake over. Even worse, there were two pool pumps right at the bottom of the steps!!!!

 

[skoronesa]

Found this cat in the crawlspace of a 150yr old house. I was very tempted to ask the homeowner if there was a reward finding their lost cat

 

[skoronesa]

 

[skoronesa]

This guy needs to learn how to use a sharpie. Look at all that iron buildup from the turbulence!! Less flow than 1/2"!! They got lucky it didn't blow. I love my bandsaw, showed that to the customer and they were speechless.

 

[skoronesa]

Did you know propress isn't the same as shark bites?

One of our guys added a valve and a new ice maker connection. Two days later customer calls and says it's dripping. It was dark when I first looked, I told the customer it was likely because he didn't clean the pipe first. After I cut it on the right of that tee the whole thing swiveled and I just laughed and shook my head.

 

[skoronesa]

 

[skoronesa]

I've never run into a tailpiece with a garden hose connection before. I made it work.

 

[skoronesa]

Got mulch?

 

[skoronesa]

Lawn chair at the driving range.

 

[skoronesa]

I figure it will either hold for 10 miles or 10,000.

 

[skoronesa]

Pulled a pump from my basement bathroom. Check valve was above gate valve........

View attachment 130527

That's in case the pump kicks on while you're changing the check valve

 

[skoronesa]

Here it is. You could heat those threads with your torch and pull the threads off the branch. The threads were soldered on.
View attachment 135986

If you look at the picture I posted you'll see it's cast brass, I couldn't have just unsoldered it.

 

[skoronesa]

Anyone know “Agent Orange” from back in the day?
I know OpenSights knows these guys.

Bloodstains is one of my favorites.

 

[skoronesa]

View attachment 136196

Did you actually open the turret and see the termination? I've seen pe used as a sleeve for copper plenty of times.

 

[skoronesa]

just got to jacksonville with the fam at the performing arts center to watch Elf broadway show. Hit the bathroom once inside. This falls under “you had one job” title. Completley useless

I’ve been on at least 4 jobs that spec’d a c.o. W flush plug and plate above a 4” cross that landed center between two water closets like this pic appears to be. No room in either stall for the access so the idea is gotta pull the partition. Who the eff is ever gonna pull a partition before a toilet is beyond me. But I’m thinking it’s a common thing with how back to back bathroom groups are laid out

Just grind off the access door hinges or cut it up so you can pull it out and work like that. I keep sheetmetal on the van so I'd cut a square to screw over when done.

Yes it will take longer with the stall door in the way, we bill by the hour......

 

[skoronesa]

Too much rain in that bed, the plumbing parts will get wet and melt!

 

[skoronesa]

View attachment 136757

 

[skoronesa]

That ABS is a work of art.

You like the s-trap standpipe? Haha

 

[skoronesa]

I bet you put a wye strainer on the abs s-trap line

Give me a dollar and I'll tell you if you're correct 😘