Plumbing Zone - Professional Plumbers Forum banner

1 - 20 of 20 Posts

·
Registered
Plumbing Parts Manufacturing
Joined
·
162 Posts
Discussion Starter #1
I am in the manufacturing trade. I am not a plumber. We make faucet stems, cartridges, tools, etc. here in the USA. I joined because I like to identify stems and cartridges and see what is changing, needed in the market. I am here to serve if I can. Most of you buy from my customers and I hope to enjoy the community from time to time and see what I can learn.

I understand that this is board is for plumbers. The plumber is our end user even if we do not sell direct to the plumber. If you feel I need to be banned because I am not a plumber, I understand. But I hope though that I can add value. I know a ton about plumbing parts, especially brass stems, cartridges and thermostatic valves. We also make tools like the ONA Puller, the Pasco EZ Out, etc.

Thank you for reading.
 

·
Registered
Plumber, Pipe Fitter, General Gas Fitter, Oil burner Mechanic Plus more Certificates
Joined
·
401 Posts
I am in the manufacturing trade. I am not a plumber. We make faucet stems, cartridges, tools, etc. here in the USA. I joined because I like to identify stems and cartridges and see what is changing, needed in the market. I am here to serve if I can. Most of you buy from my customers and I hope to enjoy the community from time to time and see what I can learn.

I understand that this is board is for plumbers. The plumber is our end user even if we do not sell direct to the plumber. If you feel I need to be banned because I am not a plumber, I understand. But I hope though that I can add value. I know a ton about plumbing parts, especially brass stems, cartridges and thermostatic valves. We also make tools like the ONA Puller, the Pasco EZ Out, etc.

Thank you for reading.
Welcome
 

·
Registered
Service Plumber
Joined
·
201 Posts
Oh No,,,
This is just like the horror movies,,,
The one where the beautiful blonde is running into the tool shed to hide from the maniacal killer,,,
I have my hands over my face but I am still peeking through my fingers,,,
I know what is about to happen,,,
BaWalter,
RUN, run now, don't look back, hurry!!!!
 

·
Registered
Joined
·
10,017 Posts
there should be a section for manufactures of plumbing and related items....and they can only post in that section or areas of what they sell..just as long as they dont make it a fukin commercial every time they post....
here would be a question..do you let a valid manufacture put a link to there company website for info????
 

·
Super Moderator
Joined
·
8,403 Posts
there should be a section for manufactures of plumbing and related items....and they can only post in that section or areas of what they sell..just as long as they dont make it a fukin commercial every time they post....
here would be a question..do you let a valid manufacture put a link to there company website for info????

There's a section for them and many rules that come with it. The link in Post #3 shows how they can proceed.
 

·
Registered
Joined
·
5,489 Posts
I am in the manufacturing trade. I am not a plumber. We make faucet stems, cartridges, tools, etc. here in the USA. I joined because I like to identify stems and cartridges and see what is changing, needed in the market. I am here to serve if I can. Most of you buy from my customers and I hope to enjoy the community from time to time and see what I can learn.

I understand that this is board is for plumbers. The plumber is our end user even if we do not sell direct to the plumber. If you feel I need to be banned because I am not a plumber, I understand. But I hope though that I can add value. I know a ton about plumbing parts, especially brass stems, cartridges and thermostatic valves. We also make tools like the ONA Puller, the Pasco EZ Out, etc.

Thank you for reading.

You have no idea how elated we are to have you.


We will need some tangible proof that you are who you say you are. You could send @Tango a private message with some pics of your factory as proof so he can confirm you're not bullschitting.
 

·
Registered
Joined
·
5 Posts
I am in the manufacturing trade. I am not a plumber. We make faucet stems, cartridges, tools, etc. here in the USA. I joined because I like to identify stems and cartridges and see what is changing, needed in the market. I am here to serve if I can. Most of you buy from my customers and I hope to enjoy the community from time to time and see what I can learn.

I understand that this is board is for plumbers. The plumber is our end user even if we do not sell direct to the plumber. If you feel I need to be banned because I am not a plumber, I understand. But I hope though that I can add value. I know a ton about plumbing parts, especially brass stems, cartridges and thermostatic valves. We also make tools like the ONA Puller, the Pasco EZ Out, etc.

Thank you for reading.
let the bloke stay , surely he will be fountain of knowledge as long as he does not advertise.
 

·
Registered
Plumbing Parts Manufacturing
Joined
·
162 Posts
Discussion Starter #9
This is definitely an exclusive site. My bad for not reading further in the begining. I have no desire to advertise (again - we don't sell retail) just to share knowledge. As far as bona fides, our website is in profile. I will lurk and only ask questions or make comments where it is appropriate.
 

·
Registered
Plumbing Parts Manufacturing
Joined
·
162 Posts
Discussion Starter #10
You have no idea how elated we are to have you.

We will need some tangible proof that you are who you say you are. You could send @Tango a private message with some pics of your factory as proof so he can confirm you're not bullschitting.
@Tango has my (verified) email address which has our domain in it. There are pictures on the web. If there is something else to confirm, let me know. ;)
 

·
Registered
Joined
·
10,017 Posts
This is definitely an exclusive site. My bad for not reading further in the begining. I have no desire to advertise (again - we don't sell retail) just to share knowledge. As far as bona fides, our website is in profile. I will lurk and only ask questions or make comments where it is appropriate.
who and where do you wholesale out to?? any particular region or coast to coast??
 

·
Registered
Plumbing Parts Manufacturing
Joined
·
162 Posts
Discussion Starter #12
We manufacture for wholesalers, repackagers and some OEMs nationwide and a few in Canada. We used to send parts to Mexico for PP back when B&D owned them. What a disaster that company has become.
 

·
Super Moderator
Joined
·
8,457 Posts
We manufacture for wholesalers, repackagers and some OEMs nationwide and a few in Canada. We used to send parts to Mexico for PP back when B&D owned them. What a disaster that company has become.
B&D! I haven’t heard that company in decades! My Dad worked for them in the late ‘70s, if it’s the same company. I know it was a manufacturing company, of what, I don’t know.
 

·
Registered
Plumbing Parts Manufacturing
Joined
·
162 Posts
Discussion Starter #14
B&D! I haven’t heard that company in decades! My Dad worked for them in the late ‘70s, if it’s the same company. I know it was a manufacturing company, of what, I don’t know.
Sorry if I was confusing. The PP I was talking about is Price Pfister (before they made the mistake of shortening it to Pfister:rolleyes:) and the B&D was Black and Decker. They bought Price Pfister in the late 80's.
 

·
Registered
Joined
·
10,017 Posts
Sorry if I was confusing. The PP I was talking about is Price Pfister (before they made the mistake of shortening it to Pfister:rolleyes:) and the B&D was Black and Decker. They bought Price Pfister in the late 80's.
black and decker suck!!!!!!!!!!!!!!..anything they buy turns into chinese crap..they did it to porter cable..now those tools suck...Pfister now sounds like a porn movie....I gotta wonder what azzholes these companies hire for PR and advertising...
 

·
Registered
Joined
·
5,489 Posts
Please tell me you have a fat cat named "Walter the whale"

We like cats.
 

·
Registered
Joined
·
12 Posts
let the bloke stay , surely he will be fountain of knowledge as long as he does not advertise.
Maybe the bloke has something that one of you’re members might need,all I see on this site after years of being away is the same old crap Bunch of frikin whiners
Peace out 🙈
 

·
Super Moderator
Joined
·
8,403 Posts
Maybe the bloke has something that one of you’re members might need,all I see on this site after years of being away is the same old crap Bunch of frikin whiners
Peace out 🙈
Let's see being away for a while just to come back and moan about someone's comment. "whiner" fits the bill all right.
 
1 - 20 of 20 Posts
Top