Identifying Part mfg from logo 1991 - Plumbing Zone

eredleaf · 09-11-2008, 11:54 PM

Does anyone know the manufacturer of this fixture?
This faucet is metric and is most likely a high end fixture.
The home it is in was built in 1991. Some of the best people in Phoenix at identifying parts have been asked and stumped by this one.
I couldn't identify how to include a picture in the post, so I have uploaded it to a website I own. If you are good at identifying logos from companies that may have shut down or changed their logo, please take a look. The image is at http://www.id-inside.com/share/fixture.JPG
Note the JPG is capitalized and it seems to matter.
Thanks.

mednick · 09-12-2008, 12:09 AM

Try Teters Faucets
1 800 448 1521
6337 Oram St
Dallas Tx 75214
They Have Recognized Fixtures For Me That
I Didnt Think Any1 Would
Email Them This Pic

Goodluck

Redwood · 09-12-2008, 12:11 AM

Anybody got a magnifying glass...
If I could see the picture there might be a 1/2 a chance!

eredleaf · 09-16-2008, 12:58 PM

I contacted Teters, no luck. I have included a link to some new related pictures. The original picture is from a faucet in the shower. This picture shows the diverter valve which is the actual part I need to replace and it shows two views of the shower head and some greater detail on the logo. The flow control bar on the showerhead has the word Brevettato printed on it and the inside is labeled Perfecta.

The image is at http://www.id-inside.com/share/parts.jpg

Thanks

Ron · 09-16-2008, 11:08 PM

I have never seen the brand before.

09-11-2008, 11:54 PM	#1
eredleaf Join Date: Sep 2008 Posts: 2 My Photos	Identifying Part mfg from logo 1991 Does anyone know the manufacturer of this fixture? This faucet is metric and is most likely a high end fixture. The home it is in was built in 1991. Some of the best people in Phoenix at identifying parts have been asked and stumped by this one. I couldn't identify how to include a picture in the post, so I have uploaded it to a website I own. If you are good at identifying logos from companies that may have shut down or changed their logo, please take a look. The image is at http://www.id-inside.com/share/fixture.JPG Note the JPG is capitalized and it seems to matter. Thanks.

09-16-2008, 12:58 PM	#4
eredleaf Join Date: Sep 2008 Posts: 2 My Photos	Identifying part more info I contacted Teters, no luck. I have included a link to some new related pictures. The original picture is from a faucet in the shower. This picture shows the diverter valve which is the actual part I need to replace and it shows two views of the shower head and some greater detail on the logo. The flow control bar on the showerhead has the word Brevettato printed on it and the inside is labeled Perfecta. The image is at http://www.id-inside.com/share/parts.jpg Thanks

09-16-2008, 11:08 PM	#5
Ron Banned Join Date: Jun 2008 Posts: 8,808 My Photos	I have never seen the brand before. __________________ Stephen Hawking: If the government is covering up knowledge of Aliens, they are doing a better job of it then they do at anything else.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Logo Feedback	Nathan	Site Help and Suggestions	21	06-16-2008 06:17 PM

09-12-2008, 12:09 AM	#2
mednick Join Date: Sep 2008 Posts: 27 My Photos	Try Teters Faucets 1 800 448 1521 6337 Oram St Dallas Tx 75214 They Have Recognized Fixtures For Me That I Didnt Think Any1 Would Email Them This Pic Goodluck

09-12-2008, 12:11 AM	#3
Redwood Certified Lunatic Join Date: Sep 2008 Location: Connecticut Posts: 20,658 My Photos	Anybody got a magnifying glass... If I could see the picture there might be a 1/2 a chance!