Eclipse Stainless faucets - Plumbing Zone

Phat Cat · 08-04-2010, 10:50 PM

Has anyone ever heard of or used Eclipse Stainless faucets?

Redwood · 08-04-2010, 11:53 PM

Nope! Never heard of them...
No local distributor...

Website looks lame without any parts info, like any foo foo faucet website...

10 year warranty with 5 years on pull out hoses...

IMHO they are lame....

Good Luck with them...

Phat Cat · 08-05-2010, 12:06 AM

Not for us. Someone asked me about them the other day. No one around here has heard of them.

Local distributor - no go. Not to mention I don't like warranties where everything has to be done in writing and if parts are no longer avail., they will substitute another faucet. Does not leave me feeling all warm and fuzzy.

gilbertjeffrey · 03-06-2011, 05:49 AM

had the misfortune of installing one yesterday. Instructions were in engrish, supply tubes were extremely hard to bend. I hope for the customers sake it lasts a while cause finding parts for it when it leaks will be just as much fun.

sheeptown44 · 03-06-2011, 07:38 AM

I have put lots of them in, and if ya need a part you just replace the whole thing, they are high end junk . the braided stainless steel supplys that come with them are a disater waiting to happen. I have one sittin under my desk now makes a good foot stool.

Richard Hilliard · 03-06-2011, 10:18 AM

http://eclipsestainless.com/

Tommy plumber · 03-06-2011, 02:33 PM

Quote:

Originally Posted by gilbertjeffrey

had the misfortune of installing one yesterday. Instructions were in engrish, supply tubes were extremely hard to bend. I hope for the customers sake it lasts a while cause finding parts for it when it leaks will be just as much fun.

Please post an intro in the introduction section. Tell us about yourself; how many years in the trade, certifications you have, areas you specialize in, etc.

U666A · 03-06-2011, 02:37 PM

Quote:

Originally Posted by gilbertjeffrey

had the misfortune of installing one yesterday. Instructions were in engrish, supply tubes were extremely hard to bend. I hope for the customers sake it lasts a while cause finding parts for it when it leaks will be just as much fun.

Engrish... I hate it.

DUNBAR PLUMBING · 03-06-2011, 04:26 PM

Looks identical to the Delta Addison model I installed this week, with exception that the handle is at the right of the assembly.

There are so many companies out there that sell faucets, more than I've ever seen from back 25 years ago.

Back then there were 10-15 solid brands and that's it. I'd say there's more than 100 if not 300 now.

gilbertjeffrey · 03-07-2011, 02:53 AM

tommy... info updated... and as to the installation orientation, I first installed it like the addison, until I realized that the h and c were wrong and looked at the pic on the box.

08-04-2010, 10:50 PM	#1
Phat Cat Senior Member Join Date: Apr 2009 Posts: 5,106 My Photos	Eclipse Stainless faucets Has anyone ever heard of or used Eclipse Stainless faucets? __________________ All that is necessary for the triumph of evil is that good men do nothing. – Edmund Burke

08-04-2010, 11:53 PM	#2
Redwood jA-Rod dat u? Join Date: Sep 2008 Location: Connecticut Posts: 9,252 My Photos	Nope! Never heard of them... No local distributor... Website looks lame without any parts info, like any foo foo faucet website... 10 year warranty with 5 years on pull out hoses... IMHO they are lame.... Good Luck with them... __________________ *"Fascism should rightly be called Corporatism, as it is the merger of corporate and government power."* ~Benito Mussolini~ Lloyd Blankfein for President 2012 - Save Money Cut Out The Middleman! 411 Plumb Appliance Stimulus Package

08-05-2010, 12:06 AM	#3
Phat Cat Senior Member Join Date: Apr 2009 Posts: 5,106 My Photos	Not for us. Someone asked me about them the other day. No one around here has heard of them. Local distributor - no go. Not to mention I don't like warranties where everything has to be done in writing and if parts are no longer avail., they will substitute another faucet. Does not leave me feeling all warm and fuzzy. __________________ All that is necessary for the triumph of evil is that good men do nothing. – Edmund Burke

03-06-2011, 10:18 AM	#6
Richard Hilliard Senior Member Join Date: Apr 2010 Location: sarasota,fl Posts: 1,277 My Photos	http://eclipsestainless.com/ __________________ Effective communication, meeting and exceeding expectations, understanding client’s needs and wants, listening and hearing the real intent of client’s words and discovering the client’s perceived value will always win over the client to use you.

03-06-2011, 04:26 PM	#9
DUNBAR PLUMBING www.DunbarPlumbing.com Join Date: Sep 2008 Location: NORTHERN KENTUCKY - GREATER CINCINNATI AREA Posts: 4,495 My Photos	Looks identical to the Delta Addison model I installed this week, with exception that the handle is at the right of the assembly. There are so many companies out there that sell faucets, more than I've ever seen from back 25 years ago. Back then there were 10-15 solid brands and that's it. I'd say there's more than 100 if not 300 now. __________________ Northern Kentucky Plumbers *\|YOUTUBE VIDEOS\| Twitter Feed \| DUNBAR PLUMBING FAN PAGE*

03-06-2011, 05:49 AM	#4
gilbertjeffrey Junior Member Join Date: Mar 2011 Location: Hawaii Posts: 5 My Photos	had the misfortune of installing one yesterday. Instructions were in engrish, supply tubes were extremely hard to bend. I hope for the customers sake it lasts a while cause finding parts for it when it leaks will be just as much fun.

03-06-2011, 07:38 AM	#5
sheeptown44 Senior Member Join Date: Oct 2010 Location: shepherdsville kentucky Posts: 116 My Photos	I have put lots of them in, and if ya need a part you just replace the whole thing, they are high end junk . the braided stainless steel supplys that come with them are a disater waiting to happen. I have one sittin under my desk now makes a good foot stool.

03-07-2011, 02:53 AM	#10
gilbertjeffrey Junior Member Join Date: Mar 2011 Location: Hawaii Posts: 5 My Photos	tommy... info updated... and as to the installation orientation, I first installed it like the addison, until I realized that the h and c were wrong and looked at the pic on the box.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
lav faucets cf??	beachplumber	Plumbing Material and Products	4	02-10-2010 12:48 AM
What are the best faucets?	hepco	General Plumbing Discussion	32	12-20-2009 10:58 PM
Stainless Steel Hole Tools	Ron	Plumbing Tools and Equipment	7	10-18-2009 02:54 AM
What faucets?	Song Dog	Plumbing Material and Products	24	09-13-2008 11:10 PM
Stainless Reinforced Female Adapters	Plumberman	Plumbing Material and Products	13	08-06-2008 08:29 AM